Morgan Tecnica - One or Multi Roll Loaders

Automated system to manage the feeding of fabric rolls to the spreader. Improve productivity, reduce cost in time and handling and improve the productivity of the entire line.

Morgan 311, 312, 313 Loader

Solid metallic structure, fixed to edge of the spreading table. From a special control panel, the operator drives the system for motorized lift of the roll , laid over a proper cradle support, from the ground directly onto the machine. A specific device for automatic cradle reversing helps the roll loading over the machine turret.

Available versions with max. capacity of 100/200/300 kg.

Technical Specifications:
  • Max. Capacity: 100 kg (311) / 200 kg (312) / 300 kg (313)
  • Max. Roll Diameter: 600 mm (311) / 800 mm (312) / 1000 mm (313)
  • Voltage 400V 3Ph 50/60 Hz
  • Fabric width 180/230 cm

Morgan 320 Loader

Single automatic carousel for the roll storage and handling. The structure is made of a storage area, with conveyorized multi-level platforms, the lower one dedicated to the roll pre-loading , already in the right spreading sequence, and the upper one is to collect the used rolls, automatically off-loaded after the spreading.
The roll loading/off-loading system, on a specific cradle support, is managed by the carousel in a fully automatic mode, in order to minimize the idle time of the spreader and improve its productivity.

Technical Specifications:
  • Max. Capacity: 50 Kg
  • Max. Roll Diameter: 300 mm
  • Voltage 400V 3Ph 50/60 Hz
  • Fabric width 180/230 cm

Morgan 330 Loader
10 roll automatic carousel for the roll storage and handling. The storage area is made of 2 overlaped conveyorized platforms. The lower platform is for the roll pre-loading, randomly placed, as the proper spreading sequence is set by the control panel, equipped with interactive PC Touch with a dedicated advanced software, intuitive and user friendly.
The upper one is to collect the used rolls, automatically off-loaded after the spreading. The roll loading/off-loading system, on a specific cradle support, is managed by the carousel in a fully automatic mode, in order to minimize the idle time of the spreader and improve its productivity.

  • PC Touch on board to control all working functions
  • Innovative and user friendly icons graphic interface
  • Possibility to interface with Morgan spreading machine and with MD COP planning software.


Technical Specifications:
  • Max. Capacity: 60 Kg
  • Max. Roll Diameter: 300 mm
  • Max. number of rolls 10
  • Voltage 400V 3Ph 50/60 Hz
  • Fabric width 180/230 cm

Are You Interested?
We will be glad to welcome you in our showroom at a previously agreed date.